JSKA series water ring vacuum pump system

JSKA series water ring vacuum pump system

Summary:

Water ring vacuum pump because of its working principle and structural features in the chemical, pharmaceutical and other industries widely used.In the normal application, the working fluid of water ring vacuum pump is used more direct way

Water ring vacuum pump closed-circuit circulation system main characteristics are as follows:

1, the unit as a complete set of equipment supply, including gas-liquid separator, heat exchanger, frame, such as internal pipeline accessories, in favor of the installation of the user, can greatly shorten the user installation period.

2, working liquid can be used in all kinds of chemical industry, water or solvent such as cycle, greatly reducing the environmental pollution caused by chemical industry.

3, such as using the pumping medium as the working fluid, pumping medium by recycling.

4, JSKA series closed-loop system should be based on user entry conditions, cooling water conditions, conditions of vent design, belong to the non-standard products.

Working principle:

The most basic JSKA series liquid ring vacuum pump/compressor closed-circuit circulation system as shown in figure 2:

Gas is pumped from the suction mouth into the liquid ring vacuum pump/compressor, the liquid ring vacuum pump/compressor compressed together with part of the working liquid into gas liquid separator, in a gas-liquid separator gas-liquid two phase separation, gas discharge from the vent, working liquid by the heat exchanger in the liquid ring pump/compressor cycle use.

Liquid ring pump produces heat in the process of work, mainly include: heat pump/compressor reactive power;Suction gas of high temperature heat;Suction gas containing can non-condensable gas release phase change heat in the compression process.Heat exchanger is the main purpose of cooling liquid by cooling water, keep working fluid temperature within a reasonable range.